LaserINT
Material - Acrylic / Hot Stamping Foil
Size - 1220 x 610 mm
Thickness - 0.6, 0.8, 1.5, 3.0 mm
Cutting Depth - 0.08 mm
2 Ply and 3 Ply options
Especially made for laser engraving. It allows fast and cost effective processing, supports high standards and is ideal for industrial use. The two layered material on acrylic base is characterized by its timeless but permanently Matt surface.
Technical Properties
Indoor
Outdoor
Flexible
Breakproof
UV - Stable
Temp. Max 80 deg.
Processing Options
Cutting
Sawing
Drilling
Rotary Engravable
Laser Cuttable
Laser Engravable
LaserEXT
Material - Acrylic / Acrylic Top
Size - 1220 x 610 mm
Thickness - 0.7, 1.5 mm, 3.1 mm
Cutting Depth - 0.30 mm
2 Ply
A two layered plastic material with brilliant laser qualities it is perfect for industrial environments and high traffic areas. The acrylic surface is UV - resistant, scratch resistant and largely acid resistant. These acrylic sheets have been tested for resistance to aging under extreme conditions.
Technical Properties
Indoor
Outdoor
Flexible
Break Proof
UV - Stable
Temp. max 80 deg.
Processing Options
Cutting
Sawing
Drilling
Rotary Engravable
Laser Cuttable
Laser Engravable
LaserINT Duo
Material - Acrylic / Acrylic Top
Size - 1220 x 610 mm
Thickness - 1.8 mm
Cutting Depth - 0.25 Layer 1
0.45 Layer 2
LaserINT Duo offers a two colored engraving possibility by direct engraving without covering. The material is engraved with the same tool in two depths resulting in the appearance of the two different contrasting colors.
Technical Properties
Indoor
Outdoor
Flexible
Break Proof
UV - Stable
Temp. max 80 deg.
Processing Options
Cutting
Sawing
Drilling
Rotary Engravable
Laser Cuttable
Laser Engravable
LaserEXT 3 Ply
Material - Acrylic top / Acrylic / Acrylic top
Size - 1220 x 610
Thickness - 1.4 mm
Cutting Depth - 0.15 mm
Front Side - Matt
Back Side - Glossy
A three layered plastic material with brilliant laser qualities perfect for laser engraving. The acrylic surface is UV - resistant, scratch resistant and largely acid resistant. The acrylic has been tested for resistance to aging under extreme conditions. Engrave on both sides.
Technical Properties
Indoor
Outdoor
Flexible
Break Proof
UV - Stable
Temp. max 80 deg.
Processing Options
Cutting
Sawing
Drilling
Rotary Engravable
Laser Cuttable
Laser Engravable
Laser Foil
Material - Acrylic - Hot Stamping Foil
Size - 610 x 305
Thickness - 0.2 mm
Cutting Depth - 0.05 mm
Due to the very thin thickness of 0.2 mm Laser foil is perfect for convex applications. This foil is easy to engrave and cut by laser. It is available in different colors and the back is self adhesive.
Technical Properties
Indoor
Flexible
Break Proof
UV - Stable
Temp. max 80 deg.
Processing Options
Cutting
Stamping
Screen Print
Rotary Engravable
Laser Cuttable
Laser Engravable
Rotary Laminate
Material - ABS / Hot stamping foil
Size - 1220 x 610 mm
Thickness - 0.8 mm, 1.5 mm
Cutting Depth - 0.05 mm
The very thin surface makes it possible to engrave fine textures without shadow effects. The surface in matt and free from reflections. This material is not laser cuttable.
Technical Properties
Indoor
Flexible
Break Proof
Temp. max 85 deg.
Processing Options
Cutting
Sawing
Drilling
Rotary Engravable
Laser Engravable
Seklema
Sizes - 1220 x 610 mm
610 x 610 mm
610 x 400 mm
610 x 300 mm
A 2 sided self healing material designed to hold materials on your engraving table without the use of table tapes and jigs.
It works with metal and plastic engraving stock as well as many other materials. It is resusable and can easily be cleaned with only a soft sponge and water.
Laser Bond 100
Liquid Ink
Sizes - 50 g,
125 g
250 g
500 g
LaserBond 100 Liquid Ink is a water-based concentrate and needs to be shaken vigorously for 1 – 2 minutes to insure that all ingredients are thoroughly mixed and then diluted with denatured alcohol by at least 1:1 for manual application using preferably, a foam brush OR by at least 2:1 for application using an airbrush or spray gun and it is recommended that the spray be applied by holding the nozzle about 10” – 12” away from the surface and misting the LaserBond 100 directly onto it using a side-to-side motion. Dilution ratios of up to 5:1 have proven to work successfully; however you should start with these lower dilution guidelines and increase the amount of denatured alcohol until a smooth and even coat is achieved. The dilution with denatured alcohol is important as it helps to break the surface tension and keeps the LaserBond 100 from beading up or separating/streaking on the substrate surface.
Properties
For Product Identification, Decoration, Branding and more.
Quick and Easy to Use
Permanent & High Contrast Marking.
Will not Crack or Peel.
Resistant to Corrosion, Abrasion & Fading.
Laser Bond 100 Spray
Size - 340 grams
Aerosol Spray for Blackening Laser Marked Surfaces
LaserBond™ 100 all purpose aerosol spray creates solid black marks on un-coated metals including; stainless steel, brass, aluminum, copper, chrome plating and many more. LaserBond™ 100 all purpose aerosol spray is premixed at the correct consistency, so no diluting is necessary. Applied like a regular can of spray paint, one can will cover approximately 2500+ square inches.
Properties
For Product Identification, Decoration, Branding and more.
Quick and Easy to Use
Permanent & High Contrast Marking.
Will not Crack or Peel.
Resistant to Corrosion, Abrasion & Fading.
info@leinsterlaser.com Mob: + 353 851319027 Tel: 353 419813716 Copyright © Leinster Laser 2020 Drogheda, Co. Meath